Black and Decker FSMH1300FX Traducido De Las Instrucciones Originales página 9

If the supply cord is damaged, it must
u
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Extension cables & Class 1
product
A 3-core cable must be used as your
u
appliance is earthed and of Class 1
construction.
Always use an approved extension
u
cable suitable for the power input of
this appliance (see technical data).
Up to 30m of 1.50mm
cable can be used without loss of
product performance. Before use,
inspect the extension cable for signs
of damage, wear and ageing. Replace
the extension cable if damaged or
defective. When using a cable reel,
always unwind the cable completely.
Labels on appliance
The following pictograms along with the
date code are shown on the appliance.
CAUTION! Hot Steam
Do not leave unsuper-
vised with young children
Wash at 60°C. Do not
use bleach or fabric
softener
Features
This appliance includes some or all of the following features.
1. On/off switch
2. Autoselect dial
TM
3. Hand held steam unit handle
4. Filler cap
5. Water tank
extension
2
(Original instructions)
6. Interface
7. Floor extension release button
8. Floor extension
9. Floor cleaning head
10. Cleaning pad
11. Cleaning pad removal tab
12. Accessory attachment hose
13. Angle brush accessory (for use on hard to remove
stains)
14. Brush accessory (for use on tiles / grout)
15. Squeegee accessory (for use on shower screens /
glass / mirrors / clothing / upholstery)
16. Squeegee sock
@
Assembly
Warning! Before attempting any of the following
instructions, make sure that the appliance is
switched off and unplugged and the appliance is
cold and does not contain any water.
Attaching the floor extension to the floor
cleaning head (Fig. A)
Push the floor extension (8) firmly into the floor cleaning
u
head (9) making sure it clicks securely into place.
Attaching the hand held hand held steam unit
to the floor extension (Fig. B)
Push the hand held hand held steam unit firmly onto the
u
floor extension (8) making sure it sits correctly over the
interface (6) and clicks securely into place.
Warning! Inspect the seal between the connection point
on the hand held steam cleaner and the floor extrension (8)
before each use. If the seal malfunctions or is damaged,
please contact your nearest authorised repair agent. Do not
use the appliance.
Removing the hand held steam unit
Push the release button (7) on the floor extension (8) and
u
lift the hand held steam unit off the interface (6).
Attaching a cleaning pad (Fig. C)
Replacement cleaning pads are available from your
BLACK+DECKER dealer :- (cat no. FSMP20-XJ).
Place a cleaning pad (10) on the floor with the velcro 'loop'
u
side facing up.
Lightly press the steam mop down onto the cleaning pad
u
(10).
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop
supported in the upright position when stationary and make
sure the steam mop is turned off when not in use.
ENGLISH
9