EINHELL TC-VC 1820 S Manual Del Usuario página 17

Fitting the handle (Fig. 8)
Fit the handle (1) by pressing it into the opening
provided for it in the equipment head (3).
5.2 Fitting the filter
Notice!
Never use the wet and dry vacuum cleaner wit-
hout a filter!
Always ensure that the filters are perfectly secure!
Fitting the foam filter (Fig. 6)
For wet-vacuuming, slip the supplied foamed
plastic filter (15) over the filter basket.
Fitting the additional filter (Fig. 7)
For dry vacuum cleaning always use the supplied
additional filter (18). Mount the additional filter,
so that no air is sucked through the filter cage (4)
without being filtered.
Assembling the dirt bag (Fig. 9)
For vacuuming fine, dry dirt it is recommended
that you fit the dirt bag (14). Slip the dirt bag (14)
over the vacuuming hole. The dirt bag (14) is sui-
table for dry-vacuuming only. The dirt bag makes
it easier to dispose of the sucked-in dust.
5.3 Fitting the suction hose (Fig. 3, 10, 11)
Connect the suction hose (10) to the correspon-
ding connector on the wet and dry vacuum clea-
ner, depending on the application required.
Vacuuming
Connect the suction hose (10) to the suction hose
connector (8)
Blowing
Connect the suction hose (10) to the blow con-
nector (9)
One or more of the elements which make up the
3-part suction tube (11) can be attached to the
suction hose (10) to extend it. The adapter (17)
must be inserted between the suction tube (10)
and the combination nozzle (12) or crevice nozzle
(16).
Anl_TC_VC_1820_S_SPK9.indb 17 Anl_TC_VC_1820_S_SPK9.indb 17
GB
5.4 Suction nozzles
The combination nozzle (12) with attachments is
for vacuuming solids and liquids over medium to
large areas. The crevice nozzle (16) is specially
designed for cleaning cervices and edges.
6. Operation
6.1 On/Off switch (Fig. 1)
Switch position 0: Off
Switch position I: On
6.2 Dry vacuuming
Use the dirt bag (14) and the additional filter (18)
for dry vacuuming (see point 5.2).
Always ensure that the filters are perfectly secure.
6.3 Wet vacuuming
For wet-vacuuming, use the foam filter (15) (see
point 5.2).
Check that the filter is securely fitted at all times.
When wet vacuuming, the floating safety switch
(fig. 3/5) closes when the maximum tank level
is reached. In doing so, the suction noise of the
equipment will change and become louder.
You must then switch off the equipment and em-
pty the tank.
Danger!
The wet and dry vacuum cleaner is not suitable
for the vacuuming of combustible liquids.
For wet vacuuming, use only the supplied foam
filter.
6.4 Blowing
Connect the suction hose (10) to the blow con-
nector (9) on the wet and dry vacuum cleaner.
- 17 -
08.12.2021 10:29:07 08.12.2021 10:29:07