Publicidad
STEP 1
With the large cylinder of the
gas spring facing up, determine
if the gas spring needs to switch
directions by deciding which
direction the mirror will face inside
the cabinet, left or right.
If in the correct position, move
onto Step 2; if not, uninstall
the two small screws that
attach the gas spring to the
soft-close/swivel mechanism. Flip
the gas spring and reattach it to
the mechanism (See Figure 1).
Note: The large cylinder should
always face up.
#2
#2
#2
STEP 2
In the opened position, line up the
soft-close/swivel mechanism with
the 32mm systems holes and
attach it to the cabinet sidewall
using (4) M6 x 9mm euro screws.
For panels without system holes,
mark and pre-drill the panel using
a 1/8" drill bit. Line up the soft-
close/swivel mechanism with your
holes and attach it to the cabinet
sidewall using (4) #8 x 5/8" wood
screws (See Figure 2).
1
8
#2
#2
#2
PZ2
#2
#2
2
Right
FIG. 1
FIG. 2
Customer Service: 800-626-1126 | rev-a-shelf.com
Left
Large Cylinder Head
Publicidad
