Optional Accessories; Protecting The Environment; Service Notes - DeWalt DC019 Traducido De Las Instrucciones Originales

5. Secure the bottom corner of the worklight
housing with one hand. Use the other hand
to firmly grasp the fluorescent bulb (h) at the
center and hold onto the white plastic housing
under the bulb guard. While still securing the
bottom corner, gently remove the bulb from the
worklight housing as shown. Ensure that the
socket and area around the socket is free of
dirt, dust and other contaminants.
6. Align the replacement fluorescent bulb in the
same orientation as the previous bulb. Secure
the bottom corner of the worklight housing with
one hand. Using the other hand, carefully press
on the center of the bulb's plastic housing to
secure it in place.
7. Once the replacement bulb is in place, gently
press the center of the bulb's plastic housing
to ensure it is connected properly. Replace
the bulb guard by clipping it to the worklight
housing.
8. Replace the lens cover. Place the rubber gasket
in one of the top corners and roll the gasket
onto the other top corner, finishing on a bottom.
Ensure the rubber gasket is firmly in place
around the worklight housing.
MAINTENANCE
Your D WALT appliance has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: Shock Hazard.
Disconnect battery pack and unplug
tool before replacing the fluorescent
bulb. Such preventative safety
measures reduce the risk of personal
injury.

Service Notes

This product is not user serviceable. Other than
the replacement bulb, there are no user
serviceable parts inside the worklight. Servicing at
an authorized service center is required to avoid
damage to static sensitive internal components.
Cleaning
WARNING: Remove the battery
pack and disconnect worklight from
the AC outlet before cleaning. Never
use solvents or other harsh chemicals
for cleaning the non-metallic parts of
the tool. These chemicals may weaken
the non-metallic materials used in these
parts. Use a cloth dampened only with
water and mild soap or soft non-metallic
brush. Never let any liquid get inside the
worklight; never immerse any part of the
worklight into a liquid.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
EN GL IS H
WALT, have
E
WALT product
E
WALT
E
29