Helpful Hints; How To Clean The Inside; How To Clean The Outside; Care And Cleaning - Monogram ZES1227 Serie Manual Del Propietário

An occasional thorough wiping with a solution
of baking soda and water keeps the inside

Helpful Hints

fresh.
Be certain the oven control is turned off before
cleaning any part of this oven.
How to Clean Walls, Floor, Inside Window, Metal and Plastic Parts on the Door
Some spatters can be removed with a paper towel; others may
the Inside
require a damp cloth. Remove greasy spatters with a sudsy cloth,
then rinse with a damp cloth. Do not use abrasive cleaners or sharp
utensils on oven walls.
To clean the surface of the door and the surface of the oven that
come together upon closing, use only mild, nonabrasive soaps or
detergents using a sponge or soft cloth. Rinse with a damp cloth
and dry.
Never use a commercial oven cleaner on any part of your microwave.
Removable Turntable and Turntable Support
To prevent breakage, do not place the turntable into water just after
cooking. Wash it carefully in warm, sudsy water or in the dishwasher.
The turntable and support can be broken if dropped. Remember, do
not operate the oven without the turntable and support in place.
How to Clean
Do not use cleaners containing ammonia or
alcohol on the microwave oven. Ammonia or
the Outside
alcohol can damage the appearance of the
microwave.
Case
Clean the outside of the microwave with a
sudsy cloth. Rinse with a damp cloth and then
dry. Wipe the window clean with a damp cloth.
Control Panel and Door
Wipe with a damp cloth. Dry thoroughly. Do
not use cleaning sprays, large amounts of
soap and water, abrasives or sharp objects on
the panel—they can damage it. Some paper
towels can also scratch the control panel.
Door Surface
It is important to keep the area clean where
the door seals against the microwave. Use
only mild, non-abrasive detergents applied with
a clean sponge or soft cloth. Rinse well.
18

Care and Cleaning

Countertop Microwave Oven
Power Cord
If the cord becomes soiled, unplug and wash
with a damp cloth. For stubborn spots, sudsy
water may be used, but be certain to rinse
with a damp cloth and dry thoroughly before
plugging cord into outlet.
Stainless Steel (on some models)
Do not use a steel-wood pad; it will scratch the
surface.
To clean the stainless steel surface, use a
hot, damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean,
hot, damp cloth to remove soap. Dry with a
dry, clean cloth. Always scrub lightly in the
direction of the grain.
49-40781