how to use your CheckSmart Luggage tracker
turn on the deviCe
1.
Press the red button in the center and hold for three to five seconds
until you see a red light. It will stay on for 10-15 seconds, then go out.
2.
Within 10-15 seconds, the device will connect to the network.
The light will turn green, blink three to four times, then go out.
Your CheckSmart Luggage Tracker is now on. (Note: the blinking green light will
turn off after three to four blinks. This conserves battery power even though your
device is turned on and operating). When you want to check to see if your device
is ON, lightly press on the red button in the center of the device. If the green light
blinks, then your device is ON.
to turn off the deviCe
Hold the red button in the center down until the green light flashes three times, then goes out. Your CheckSmart Luggage
Tracker is now off.
to uSe the deviCe
1.
Turn on your CheckSmart Luggage Tracker.
2.
Place it anywhere in your packed luggage.
When unpacking your luggage, remember to turn off your CheckSmart Luggage Tracker. If the device will not be used
again in the near future, we recommend removing the batteries.
NotificatioNs
• The first time you turn on your CheckSmart Luggage Tracker, you will receive a test SMS (text) and/or email as you
selected during registration. This message will confirm that your device is working.
• Each time the CheckSmart Luggage Tracker arrives at an airport, you will receive an SMS (text) and/or email
notification advising you of the location of your device.