Medisana MC 820 Instrucciones De Manejo página 36

GB
3 Operating
22
Once the heads reach this point, the direction of rotation is reversed
again and then travel up the back again. Press the button
activate the Shiatsu massage function.
Spot massage button
Switch on the device by pressing On/Off button
state spot massage for back will response. Activate the Shiatsu function
state by pressing the Shiatsu massage button
te in a spot. Pressing and holding the spot massage button
position of massage heads upward or downward. Press ▲ or ▼ until the
desired position is reached, loose the button
to de-activate the spot massage function and return to Shiatsu state.
Rolling massage button
Switch on the device by pressing On/Off button
massage function by pressing the Rolling massage button
region you wish to massage with the back massage button (

Lower button (lower back)

The massage rolls
reversal of the direction takes place when the respective end positions are
reached.

Upper button (upper back)

The massage rolls
reversal of the direction takes place when the respective end positions are
reached.

Full button (full back)
The massage rolls
backrest, up to the shoulder area, massaging the back whilst doing so.
Once the uppermost position has been reached, the direction of the mas-
saging rolls is reversed. The heads then travel down to the base of the
backrest. Once the heads reach this point, the direction is reversed again
and then travel up the back again.

Press the button

Width button (
This button is effective only in the rolling massage state. Press the rolling

massage button to activate the rolling massage function. Pressing and
holding the width button
decreases until the desired width is reached and you loose the button

Heat button
The heat function can be activated at any time with the shiatsu massage
and rolling massage, during which the vibration massage can also be
activated. Press the heat button
the control unit and the massage heads light up red. The heat is radiated
through the massage heads
heat function; the LED and the red light of the massage heads go out.

(▲▼)

travel up and down the lower half of the back. The
travel up and down the upper half of the back. The

move from the "Park" position at the base of the
again to de-activate the rolling massage function;
)

, the distance between the rolls increases or

to activate the function; the LED on

. Press button

again to de-

. Only under shiatsu

. Massage heads rota-

changes


. Press button

. Activate the Rolling

. Select the
  
/

again to de-activate the
i
again
i
/ ).
i
i
i
i
i
i
i

.
i