Zivan NG5 Manual De Instalación Y De Usuario página 10

Visualization
100%
80% 80%
START
V
A
ON CHARGE
V A
LINE
ALARM
MODE
END CHARGE
Charging Level Indicator
RED LED shows that the battery is in the initial charging phase.
100%
80% 80%
YELLOW LED shows that the battery charger has reached 80% of charge.
GREEN LED shows that the battery has reached 100% of charge.
START
Further information can be found in the description of the Charging Curve.
Digital Instrument
V
A
V A
MODE
Ready light
The RED LIGHT on shows that charging process (composed by a CHARGING phase and by an eventual
ON CHARGE WAITING phase) has been activated.
The GREEN LED lights on from the end of the charge: it indicates the battery is ready to be used.
END CHARGE
Line Alarm Indicator
This RED LED turns on in two situations:
1.
2.
LINE
ALARM
D01474-16
0
1
2
3 Charging phase indicator
4
5
Display
6
7
Charging curves set
8
9
Ready light
A
B
Digital adjustment mode
C
D
Mains alimentation alarm
E
F
SET
On current production
Optional
The Digital Instrument indicates the output tension expressed in Volt (V) and the output current
expressed in Ampère (A).
The corresponding unit of measure of the visualised numbers is indicated by the LED V or A.
By means of the MODE button (when installed),, it is possible to select A or V to be visualised.
N.B. The instrument indicates with three dots ... the output voltages, which are lower to the nominal
value of the battery.
one of the 3phases is lacking of input supply circuit (in this situation the battery charger will not
operate and the charging level indicator changes to yellow - check mains and input fuses);
Start/Stop hardware open (in this situation the battery charger will not operate and the charging
level indicator changes to yellow).
NG5-NG7-NG9
Description Equipment
English
10