Rev-A-Shelf CTOHSL-18-1 Instrucciones De Instalación página 2

STEP 1
Secure the center bracket to the
two arm brackets using (4) M5 x 6
mm Euro screws.
(See Figure 1).
#2 #2 #2
STEP 2
Use provided measurements
to mark and pre-drill holes for
the center bracket/arm bracket
assembly. Find the center line on
the hamper door and pre-drill (4)
holes using the 1/8" drill bit (See
Figure 2).
1
8
STEP 3
Screw the center bracket/arm
brackets to the hamper door using
the #8 x 5/8" wood screws (See
Figure 3).
#2 #2 #2
STEP 4
Reference the flap stay instruction
sheet and install the flap stay to
the door and the inside of the
cabinet (See Figure 4).
2
FIG. 1
FIG. 2
Hamper Door Panel
18" 24" 30"
A 11-25/32" 16-25/32" 22-25/32"
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
2-3/16"
(55 mm)
Center Line
FIG. 4