Domyos ENERGY RUN Manual De Instrucciones página 17

SETTINGS
1. Unit of measurement
Press the button to display the desired unit of measurement (METRIC = kilometres / ENGLISH = miles).
2. Screen contrast
Press the incline adjustment buttons to adjust the contrast.
3. Demonstration mode
The demo mode is designed to be used when the treadmill is displayed in store. It allows the screen to remain in operation when the safety
key has been removed from the console (automatic presentation of different programs).
Press the button to activate or deactivate the demonstration mode.
4. Performance Summary
Display of the total time (in hours) and the distance run (in miles or kilometres depending on the unit of measure chosen) since the treadmill
was first started up.
DEACTIVATING THE INFORMATION MODE
• Remove the safety key from the console.
„ MAINTENANCE
Regular maintenance is necessary to maintain the performance of the machine and to extend the life of the product. Refer to the maintenance
table at the end of the instructions.
Failure to comply with maintenance recommendations may result in premature wear, permanent damage and voiding of the guarantee.
If you have any questions, please contact your local DECATHLON store or visit our website, www.domyos.com.
The following can help reduce treadmill noise:
1. Tighten the screws and bolts once a month.
2. Lubricate the running belt after 20 hours of use. Process described below: "Lubrication of the running belt."
3. Place a suitable floor mat (such as the Domyos Training Mat) under your treadmill.
WEEKLY MAINTENANCE
Inspect and, if necessary, tighten all external parts of the treadmill.
Cleaning:
• Switch off and then unplug the treadmill.
• Apply a small amount of mild, multi-purpose cleaner, using a 100% cotton cloth. Do not spray directly onto the walking belt
and do not use acid or ammonia-based cleaning products.
• Wipe the console and screens.
• Remove any dust and grime from the hand rails, uprights, foot rails, frame and motor hood. In addition, wipe the deck along
the sides of the walking belt. Do not wipe under the walking belt.
Adjusting the position of the walking belt (centring):
The space G between the walking belt and the foot rails must be visible at all times on both sides of the belt. This prevents damage
to the walking belt and untimely stopping.
G G
• Run your treadmill at 5 km/h (3 mph) and stand behind
the machine.
• The belt is skewed to the left:
Turn the left adjusting screw clockwise half a turn.
• The belt is skewed to the right:
Turn the right adjusting screw clockwise half a turn.
• Let the treadmill run long enough for the belt to reposition
itself (1-2 minutes) and repeat the procedure if necessary.
However, make sure that the belt is not too tight.