Sartorius YDP12IS-0CEUV Instrucciones De Instalación página 5

§ Wait until the control LED in the
"FEED" button lights up in amber
(orange); then immediately let go
of the "FEED" button
§ Wait until the control LED in the
"FEED" button lights up in green
> The printer is now switched to "Line
Mode."
§ Activate paper recognition:
Turn off the printer, press the "FEED"
button; turn the printer back on while
holding down the "FEED" button.
§ Let go of the "FEED" button when the
control LED in the "FEED" button
blinks red
> The printer now recognizes the paper.
§ Wait until paper recognition has been
completed and the status messages
have been printed
§ Press the "FEED" button so that the
next label is brought forward
> The printer has now successfully
completed paper recognition and now
"knows" where the next label begins.
§ Switch the printer back to the "Page
Mode":
Turn off the printer. Press the "FEED"
button; turn the printer back on while
holding down the "FEED" button.
§ Let go of the "FEED" button when the
control LED in the "FEED" button
flashes in red
§ Wait until the control LED in the
"FEED" button goes out and then
flashes in green; then immediately press
the "FEED" button and hold it down.
§ Wait until the control LED in the
"FEED" button lights up in amber
(orange); then immediately let go
of the "FEED" button.
§ Wait until the control LED in the
"FEED" button lights up in green
> The printer is now switched to the
"Page Mode."
All manuals and user guides at all-guides.com
5