Rechargeable Battery - LEMANIA ENERGY LEM122470 Manual De Usuario

WARNING
PLEASE READ AND UNDERSTAND THESE
INSTRUCTIONS BEFORE USING THE SMART CHARGER
WARNING! DO NOT ATTEMPT TO CHARGE A NON-

RECHARGEABLE BATTERY

CAUTION:
-Never attempt charge batteries that are not compatible with the charger.
-Do not attempt to use the charger to recharge dry or primary cells or batteries that are
not intended for recharging. Doing so could result in fire or explosions that may cause
personal injury or property damage.
-Always ensure that the output voltage and current specifications match the appropriate
battery type.
-Never use the charger under reverse polarity conditions.
-Suitable for indoor use only.
-The manufacturer assumes no liability for damage resulting from unauthorized or
incorrect use.
-Do not attempt to charge more than one battery at a time in 12V.
-Do not attempt to charge frozen batteries, doing so can be extremely dangerous.
-Do not attempt to charge batteries that show signs of damage as this may cause fires or
explosions.
-Do not attempt to use the charger in damp conditions, submerge or expose the device to
running water or rain.
-Only use the charger in a well-ventilated environment, do not attempt to charge
batteries in sealed or pressurized areas.
-Never attempt to use the charger near volatile or flammable substances or while it is
placed on a battery as gasses released during charging may cause explosions or damage
to the charger.
-Do not place the charger on warm surfaces or cover the charger or battery during
charging and ensure that all ventilation slots are clear during operation.
-Do not attempt to start a vehicle while the charger is connected.
-Before carrying out maintenance or work when you are not using the charger ensure
that it is disconnected.
-Prevent short circuits and make sure not to bridge terminal connections while
connecting the charger to the battery.
-Connect the charger to the battery terminals only in accordance with the instructions.
Never connect the charger in a different or reverse order and make sure to use
appropriate tools when loosening or removing terminal connectors.
-Do not touch the battery terminals, clamps, or ring terminals when the charger is
connected to a power source.
-Before connecting the charger to a vehicle ensure that the battery has been
EN 02