Important - Metra 99-7629S Instrucciones De Instalación

ISO DDIN radio provision
1. Secure the radio brackets to the radio using screws
provided with the radio. (Figure A)
2. Locate the factory wiring harness and antenna connector
in the dash, and complete all necessary connections to
the radio. Metra recommends using the proper mating
adapter from Metra and/or AXXESS. Re-connect the
negative battery terminal and test the radio for proper
operation.
3. Reassemble the dash in reverse order of disassembly,
using the 99-7629S radio trim panel.
METRA. The World's best kits.
Installation instructions for part 99-7629S
Kit Assembly
(Figure A)
metraonline.com
™

IMPORTANT

If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
P
OWER