Metra 99-7618G Instrucciones De Instalación

Para nissan sentra 2013 y mas

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-7618G
Nissan Sentra 2013-up
KIT FEATURES
• ISO DIN Head unit provision with pocket
• Painted Grey to match factory dash
KIT COMPONENTS
• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) Four #8 x 3/8" Phillips screws • E (4) White Panel Clips
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Harness
Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench
METRA. The World's best kits.
APPLICATIONS
99-7618G
C
1-800-221-0932
Dash Disassembly
– Nissan Sentra 2013-up ........................................ 2
Kit Assembly
– ISO DIN head unit provision with pocket ............... 3
D
E
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-7618G

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7618G APPLICATIONS Table of Contents Nissan Sentra 2013-up 99-7618G Dash Disassembly – Nissan Sentra 2013-up ........2 Kit Assembly – ISO DIN head unit provision with pocket ....3 KIT FEATURES • ISO DIN Head unit provision with pocket •...
  • Página 2: Dash Disassembly

    99-7618G Dash Disassembly 1. Unclip and remove the trim panel surrounding the radio. (Figure A) 2. Remove (4) Phillips screws securing the radio. (Figure B) Continue to kit assembly (Figure A) (Figure B)
  • Página 3: Kit Assembly

    4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Reassemble dash in reverse (Figure A) order of disassembly using the 99-7618G radio trim panel instead of the factory panel.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7618G NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7618G AplicAciones Indice Nissan Sentra 2013 y mas 99-7618G Desmontaje del tablero – Nissan Sentra 2013 y mas ........2 Ensamble del kit – Provisión de unidad central ISO DIN con cavidad ..3 cArActerísticAs del kit...
  • Página 6: Desmontaje Del Tablero

    99-7618G Desmontaje del tablero 1. Desenganche y retire el panel de moldura que rodea el radio. (Figura A) 2. Quite los (4) tornillos Phillips que sujetan el radio. (Figura B) Continuará la ensamble del kit (Figura A) (Figura B)
  • Página 7: Ensamble Del Kit

    (Figura A) 4. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o (Figure A) de AXXESS.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7618G EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido