Battery Cover; On/Off Switch - Honeywell 88101 Serie Manual Del Propietário

Replacing the batteries in your solar speaker
page 5
SCREWS

BATTERY COVER

BATTERY PACK

ON/OFF SWITCH

Turn the ON/OFF switch to "OFF." Use a flat head screwdriver to remove the two screws holding the battery cover in place. Remove the old battery pack by carefully
unplugging it from the bottom of the solar speaker. Replace with one new Ni-Mh 2000 mAh AA rechargeable battery pack (sold separately). Replace bottom cover by
aligning it properly and then inserting each screw into one of the two holes and turning the screws clockwise until secure.
WARNING: Do not dispose of Ni-Mh batteries in the regular trash, municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or
mutilate batteries as injury may occur. Preserve our environment by recycling Ni-Mh batteries or disposing of them in accordance with Local, State, and Federal
regulations. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
Item # 88101x-xx