GM 88966645 Guia De Inicio Rapido página 2

2. Peel back 2" of the liner on the Body Side moldings. See Figure 1B.
3. Place Body Side Molding into position and check for correct fit.
4. Carefully remove the remaining liner from the Body Side Molding.
5. Using a roller, apply pressure to the part to press the tape onto the doors.
NOTE: CARE SHOULD BE TAKEN NOT TO DAMAGE THE PAINT FINISH.
FIGURE 1B
SIDE MOLDING REAR
(RIGHT HAND)
ALL INFORMATION WITHIN ABOVE
DATE
BORDER TO BE PRINTED EX-
ACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GMSPO SPECIFICATIONS.
2" (50mm)
Body Side Molding
REVISION AUTH
MASKING TAPE
SIDE MOLDING FRONT
(RIGHT HAND)
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Body Side Molding
PART NO.
88966645
6200 Grand Pointe Dr., Grand Blanc, MI 48439
2
88966645
SHEET
2
SHEET
6
OF
6
OF