brennenstuhl WID 550 Instrucciones De Servicio página 15

2. Beep sound indicates that learn
function has started.
3. CHANNEL symbol will flash and unit will beep as
each transmitter is detected.
4. Temperature & humidity readings of remote
transmitter displays on the receiver.
• Press & hold CHANNEL for 3 seconds to start auto
channel scroll function. ln this mode, the display will
scroll through the data from all the valid channels,
each of which will be shown for 8 seconds. Press &
hold CHANNEL for 3 seconds again to disable this
function.
CLOCK & ALARM SETTING
Clock setting
• Modes are arranged in a circular pattern starting with
clock:
clock
1. Press and hold MODE until time flashes
2. Select hour using HOUR
3. Select minute using MINUTE
4. Press AM/PM to toggle between
12 or 24 hour format
5. Press MODE to finish setting
Alarm setting
A Select alarm mode using MODE
B Select hour using HOUR
C Select minute using MINUTE
D In alarm mode, press ALARM to
toggle alarm On and Off
E When alarm sounds,
snooze the alarm for 5 minutes. After that the alarm
will sound again.
• Press any other key will shut off the alarm. Without
interruption, alarm will shut off automatically after
one minute.
alarm 1 alarm 2 high temperature alarm
will flash. Press SNOOZE to
Iow temperature alarm
1, 5 4 3 2
E, A D C B
15