Power Source; Aux 1 Source - Naxa NHS-2007 Manual De Operación

POWER SOURCE

POWER SOURCE
To turn the speaker on
·Use the suppplied AC/DC adapter to connect the POWER jack of the unit to a compatible
power source; the indicator will turn red.
·Press the POWER button to turn the unit on.
To turn the speaker off·
Press the POWER button on the remote or hold the POWER button on the side of the unit.
NOTE:
Disconnect the power adapter if the unit will not be used for a long time.

AUX 1 SOURCE

AUX 1 sources may include:
·TV/DVD/VCR
AUX 1 connection
1. Use an AV cable to connect the audio output jacks (white jack=L, red jack=R) of the
source device (e.g., a TV) to the AUX 1 audio input jacks found on the rear of the unit.
2. Turn on the unit. Press the SOURCE button until the indicator turns green. Start
playback on the source device.
NOTE: If there is no sound or if the volume is not loud enough, try increasing the volume
on the source device.
Audio Out Jacks of
TV/DVD/VCR/DVR
During playback
- Press the MUTE button to disable the sound. Press MUTE again to reenable the sound.
- Press the VOLUME+/– buttons to adjust the volume level.
- Press the BASS+/– buttons to adjust the bass level.
- Press the TREBLE+/– buttons to adjust the treble level.
- Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings.
9
T o A U X 1 Jacks of
the Sound Bar
R
L
AUX 1