Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING GUIDE
Check the followings before requesting service
SYMPTOM
No power
No sound
Remote control not working
AUX 1 / AUX 2
not working
No response from
Bluetooth source
SPECIFICATIONS
Audio output
................................................................................................................................10W
Power source of the remote
Power source of the power adapter
Output of the power adapter
ACCESSORIES
1 x Instruction Manual
1 x Remote Control with CR 2025 button cell
1 x Stereo audio connection cable with 3.5mm stereo plug
1 x RCA line in cable
1 x Adapter
2
x Screws
2
x Wall plugs
POSSIBLE CAUSE
Power adapter not connected
The unit is in Standby mode
Volume in minimum position
The connected device is not in
payback mode
Sound output of the device
weak
The batteries in the remote
control are exhausted
Wrong source is selected
Wrong source is selected
The unit is connected with
another Bluetooth device
The connected device is
Deactivated
control.........................................................DC 3V 1 x CR 2025 battery
.............................................................AC 110-240V~50/60 Hz
.........................................................................
13
POSSIBLE SOULTION
Connect the adapter
Press the Standby button on
the unit or remote control to
power on the unit.
Raise volume level by pressing
the VOL (Volume)+Button
Play the music/movie in the
connected device
Raise volume level of the
connected device
Replace with new battery
Press
source
button
indicator
turns
green(AUX
1 ) / orange (AUX 2)
Press
source
button
indicator turns Blue
Disconnect the connection and
retry.
Activate the connected device
and start the playback
DC 12V, 1.2 A
until
until
Publicidad
Tabla de contenido
