EMU SHADE PRO Manual Del Usuario página 24

G X 1
1
A
Place the UMBRELLA SUPPORT SPACER (B) on the floor and make n.5 holes to
assemble n.5 fixings suitable for the type of floor in question, considering the size
and orientation of the open umbrella with respect to the surrounding space.
The position of the holes is indicated by the n.5 equidistant holes in the UMBRELLA
SUPPORT SPACER (B).
Then make UMBRELLA SUPPORT (A), inserted inside the LATERAL POLE (2),
overlaps the UMBRELLA SUPPORT SPACER (B), making sure that the electric
cable comes out through the opening in the UMBRELLA SUPPORT SPACER (B).
Fix the UMBRELLA SUPPORT (A) and the UMBRELLA SUPPORT SPACER (B)
using 5 plugs suitable for the type of floor.
During this operation it is necessary to keep the ROTATION HANDLE (4) raised,
otherwise it is not possible to insert the SIDE POLE (2) on the UMBRELLA
SUPPORT (A).Once the SIDE POLE (2) is inserted, lower the ROTATION HANDLE
(4).
umbrella, it is recommended to perform
Be careful to insert
the pin of the
UMBRELLA
SUPPORT (A) into
the corresponding
hole in the
UMBRELLA
SUPPORT SPACER
(B).
C
C
H X 4
WARNING!
Due to the volume and weight of the
this step with the help of 3 people.
.
P X 4
A
23