HAMMER DRILL PSBM 750 B2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is suitable for:
▯
Impact-drilling into brickwork, concrete and
stone
▯
Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance is
not intended for commercial use.
Depicted components
Quick-release chuck
Teeth on the depth stop
Depth stop
Spindle lock
Locking button for the depth stop
Function selector switch
Rotational speed preselector adjusting
wheel
Rotation direction switch
Locking button for ON/OFF switch
ON/OFF switch
Additional handle
│
GB │ MT
■
32
Package contents
1 hammer drill
1 additional handle (pre-assembled)
1 depth stop
1 carrying case
1 set of operating instructions
Technical data
Rated power
consumption:
Rated voltage:
Rated idling speed:
Stroke rate:
Max. torque:
Chuck capacity:
:
Max. drill diameter:
Protection class:
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Wear hearing protection!
750 W
230 V ∼ 50 Hz
(AC)
n
50–3000 rpm
0
max. 48000 rpm
10 Nm
max. Ø 13 mm
8 mm for steel
25 mm for wood
10 mm for concrete
II / (double insulation)
L
= 85.3 dB(A)
pA
3 dB
L
= 96.3 dB(A)
WA
3 dB
PSBM 750 B2