Original Accessories/Auxiliary Equipment; Use; Additional Handle; Depth Stop - Parkside PSBM 750 B2 Traducción Del Manual De Instrucciones Original

WARNING!
► The power tool creates an electromagnetic
field during operation. This field can, in cer-
tain circumstances, impair active or passive
medical implants. To reduce the risk of fatal
injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine.
Original accessories/auxiliary
equipment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.

Use

WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance.

Additional handle

NOTE
► For safety reasons, you should only use this
appliance with the additional handle
attached.
♦ Loosen the strap on the additional handle
turning it clockwise.
♦ Push the additional handle
the quick release chuck
♦ Turn the additional handle
position.
♦ The locking positions on the additional handle
must now be pushed over the locking pin on
the spindle of the appliance.
♦ Turn the additional handle
again to tighten it.
NOTE
► Move the additional handle
various locking positions depending on your
working position. Undo and lock the addition-
al handle as described previously.
│ GB │ MT
■ 36
by
in the direction of
.
to the required
anticlockwise
into the

Depth stop

♦ Push the locking button for the depth stop
and keep it pushed in.
♦ Insert the depth stop
handle .
♦ Make sure that the teeth on the depth stop
point upwards and downwards.
♦ Pull the depth stop
between the tip of the drill and the tip of the
depth stop corresponds with the required drill-
ing depth.
♦ Release the locking button for the depth stop
to lock the depth stop

Changing tools

The appliance has a manual spindle lock.
♦ Once the motor has come to a standstill, press
and hold the spindle lock button
♦ Turn the quick-release chuck
RELEASE to open it.
♦ Insert the desired tool into the quick-release
chuck .
♦ Turn the quick-release chuck
to tighten the tool.
♦ Release the spindle lock

Operation

Select operating mode

Function selector switch:
♦ Push the function selector switch
engages at the required symbol:
Function
Drilling
Impact drilling
into the additional
out until the distance
.
.
towards
GRIP
towards
.
so that it
Symbol
PSBM 750 B2