Quick Start - M-Audio M-TRACK PLUS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

User Guide (English)
Introduction
Box Contents
M-Track Plus
USB Cable
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.

Quick Start

Setup Scenario*
Digital
Computer
Cable Box**
Microphone
Headphones
External Effects Module
(e.g., compressor, reverb, etc.)
Notes:
When recording a guitar or bass with an active pickup, set the M-Track Plus's Mic/Line /
Guitar Switch to Mic/Line. If your instrument uses a passive pickup, set the switch to
Guitar.
Do not use the Mic Input and Guitar/Line Input at the same time on one channel. This
may overload the channel and cause distortion.
Plug the M-Track Plus directly into your computer, and avoid using a USB hub. Hubs can
interfere with the M-Track Plus's audio and MIDI timing signals.
User Guide
Safety & Warranty Manual
Stereo System
Receiver***
STEREO 1
284
VOL: 28
Monitors
Guitar
3
* Items not listed in Box Contents
are not included.
** Monitor audio sources connected
to M-Track Plus's S/PDIF In by
setting the Input Selector to Digital.
To monitor audio sources connected
to the Mic Inputs or Guitar / Line
Inputs, switch it back to Analog. This
way, you can leave your mics or
instruments connected to M-Track
Plus while listening to your TV's audio
over your connected monitors—or
leave M-Track Plus connected to your
media setup even while you record
your music.
*** If you do not have monitors, you
can connect M-Track Plus's S/PDIF
Out to a stereo system receiver to
hear the audio through your home
speaker system.

Publicidad

Tabla de contenido
loading

Tabla de contenido