All manuals and user guides at all-guides.com
Please read this manual in its entirety before you use the unit to
ensure the best performance and safety.
Thank you for choosing RadioStreamer. With your RadioStreamer
you can send audio from all music sources with a 3.5 mm socket
to your usual FM radio. You can find more information about
service, support and the latest products at www.doro.com.
1. Warnings
Do not use this product in any other ways than those described
in this manual.
» Do not expose the product to heat, magnetism, cold or damp
environments.
» Avoid dropping the product or subjecting it to hard knocks.
» Keep the product and its components out of the reach of
children.
2. Use:
1. Insert batteries with plus and minus terminals as shown,
or connect the car adapter to the RadioStreamer and the
vehicle's 12 V socket.
2. Start the RadioStreamer by pressing down
3. Connect your RadioStreamer to the audio source (mp3,
music phone or suchlike) with the 3.5 mm plug and then start
the audio source.
RadioStreamer is receiving an audio signal.
4. Set the desired frequency with
5. Set the FM radio on the same frequency.
6. Adjust the audio source's volume and the FM radio's volume
until you find a pleasant level of sound and good sound
quality.
Please note!
On certain radios the automatic station search function must be
switched off.
The display switches off automatically during use to save power;
the display can be reactivated by pressing
English
will be shown in the display when the
/
.
1
for 2 seconds.
!
/
.