Installing The Batteries - TRT DTK 5400HF Manual De Instrucciones

12.
CHANNEL or buttons–
sired channels for viewing or recording.
Tracking function–
(lines or dots on screen) during playback or slow
mode.
Press to stabilize the picture in the Still mode when
the picture begins to vibrate vertically.
13. Press for manual recording.
RECORD button–
Press to activate One Touch Record-
OTR button–
ing. (only on the VCR)
14. Press to display the menu on the TV
MENU button–
screen. Press to exit the menu on the TV screen.
15.
NUMBER buttons–
for viewing or recording. To select channels from 1
to 9, first press "0" button then 1 to 9. (only on the
remote control)
When selecting cable channels which
+100 button–
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
"+100" button then press "2" and "5"). (only on the
remote control)
16.
DISPLAY button– Press to display the current time,
channel number, real time tape counter, and other infor-
mation on the TV screen. (only on the remote control)
Each time you press this button, TV screen will
change as shown. The status display (STOP, PLAY
etc.) and the tape speed display (SP, LP (playback
only), or SLP) will disappear after 5 seconds.
<OFF mode> <COUNT mode>
Press
once
17. Press to start slow motion playback.
SLOW button–
(only on the remote control)
18.
COUNTER MEMORY button–
memory on and off.(only on the remote control)
All manuals and user guides at all-guides.com
Press to select the de-
Press to minimize video 'noise'
Press to select desired channels
<CLOCK mode>
STOP STOP 5:40PM
Press
once
SP 0:12:34 SP
Press once
Press to set counter
19. COUNTER RESET button–
to 0:00:00. (only on the remote control)
EXIT button–
screen. (only on the remote control)
20.
SEARCH MODE button–
Search or an Index Search. (only on the remote control)
21.
Power cord–
(110-220V, 50/60Hz).
22.
AUDIO OUT jacks–
jacks of your audio equipment or another VCR.
23. AUDIO IN jacks–
of your audio equipment or another VCR.
24. ANT. IN terminal–
system or Satellite system.
25. VIDEO OUT jack–
of your video camera or another VCR.
26.
VIDEO IN jack–
your video camera or another VCR.
27.
CH3/CH4 selector switch–
output channel (3 or 4) for VCR playback.
28.
ANT. OUT terminal–
terminal on your TV.

INSTALLING THE BATTERIES

1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery com-
partment in the direction indicated by the polarity
CH 02
(+/-) markings.
3) Replace the cover.
Install 2 X AA battery
- 17 -
Press to reset counter
Press to exit the menu on the TV
Press to perform a Time
Connect to a standard AC outlet
Connect to the audio input
Connect to the audio output jacks
Connect to an antenna, Cable
Connect to the video input jack
Connect to the video output jack of
Use to select a video
Connects to the antenna input
EN
1B14