Index Search; Time Search - TRT DTK 5400HF Manual De Instrucciones

TO EXIT THE AUTO REPEAT MODE
Repeat steps [1] to [2], and press the F.FWD/B button.
[OFF] will then appear on the menu. Then, press the
RESET/EXIT button to return to TV mode.
Power failure: If there is a power failure for more than
30 seconds, Auto Repeat Playback will go to off.

INDEX SEARCH

This feature provides a method of indexing a recording
starting point so that it can be easily returned to in either
fast forward or rewind mode.
The index mark will be made automatically when the
REC button is pressed. It will also be marked at the
starting point of Timer recording and OTR.
The index mark will not be recorded if the
PAUSE/STILL button is pressed and released during
recording.
The time gap between making the index marks on the
tape should be greater than 1 minute for SP recording
and 3 minutes for SLP recording.
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching
program number 4 and
want to fast forward to
program number 7. You
must skip three programs.
1
Select "INDEX SEARCH" mode
Press the SEARCH MODE button on the remote control
so that the "INDEX SEARCH" appears on the TV
screen.
2
Enter your desired number
Press the PLAY/ or STOP/
button until the number of pro-
grams that you want to skip ap-
pears.
(Example: "03" for 3 programs)
The Index Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
3
Begin Index Search
Press the REW or F.FWD button. The VCR begins re-
winding or fast forwarding to the beginning of desired
program.
All manuals and user guides at all-guides.com
CURRENT PLAYBACK PROGRAM
Beginning of tape End of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4 3 2 1 1 2 3
INDEX MARK
INDEX SEARCH
03
- 26 -
NOTE: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
4
After Index Search
When the preset program is reached, the VCR will start
playback automatically.
A video cassette must be inserted in the VCR for this
function to work.
The number of Index Searches can be set up to 20.
This function will not operate in the recording mode.
When you want to cancel the Index Search while in
progress, press the STOP button.

TIME SEARCH

The Time Search function makes it possible to quickly ad-
vance the tape to your desired position simply by entering
the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50
minutes from the present position, in either
direction.
1
Select "TIME SEARCH" mode
Press the SEARCH MODE button on the remote control
so that the "TIME SEARCH" appears on the TV screen.
2
Enter your desired time
Press the PLAY/ or STOP/
button until your desired time ap-
pears.
("2:50" stands for 2 hours 50
minutes)
The Time Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
3
Begin Time Search
By pressing the REW or F.FWD button, the VCR will
rewind or fast forward to the specified point.
The time counts down as the searching progresses.
4
After Time Search
Playback starts automatically when 0:00 is reached.
A video cassette must be inserted in the VCR for this
function to work.
Time Search can be set up to a maximum of 9 hours
59 minutes (9:59).
This function will not operate in the recording mode.
When you want to cancel the Time Search while in
progress, press the STOP button.
TIME SEARCH
2 : 5 0
EN
1B14