AVM FRITZ!DECT 200 Instalación Y Funcionamiento página 7

AIN (Actuator Identifi cation Number)
Every FRITZ!DECT device has its own
individual AIN (Actuator Identifi cation
Number).
The AIN is displayed in the user interface
and is printed on the sticker on the back
of the device.
FRITZ!DECT 200
12345 6789012
AIN:
R987.321.65.498.777
Serial no.:
Input: 230 V~; 0.02 A; 50 Hz Max. load: 10 A
Article no.: 2000 2636
AVM GmbH, 10547 Berlin
Remote Controlling the
Socket with FRITZ!Fon
With the latest FRITZ!Fon cordless DECT
telephones from AVM, you can remote
control the socket of your FRITZ!DECT 200
(by switching it on and off ).
1. Press the "Menu" key on FRITZ!Fon.
2. Select "Home Network" and then
press "OK".
3. Select "Smart Home" and then press
"OK".
Under "FRITZ! Actuators", select a
FRITZDECT device and press "off " or
"on" to change its status.
12
Unsubscribe
If you would like to register FRITZ!DECT 200
with another FRITZ!Box, de-register it from
the current FRITZ!Box fi rst:
1. Hold the "DECT" button down for at least
6 seconds.
2. FRITZ!DECT 200 is de-registered from the
FRITZ!Box.
After a brief delay the "DECT" begins
fl ashing. Now you can register
FRITZ!DECT with another FRITZ!Box.
Removing FRITZ!DECT 200 from the
power outlet does not de-register it
from the FRITZ!Box.
Help in Case of Errors
No connection with the base station
The "DECT" LED fl ashes briefl y at regular
intervals. FRITZ!DECT 200 does not have a
wireless connection to the FRITZ!Box.
1. Insert the FRITZ!DECT in an outlet near
your FRITZ!Box.
2. When the "DECT" LED lights up, the fi rst
outlet is located outside the range of the
FRITZ!Box, or the wireless connection
is faulty.
Typical sources of interference
include (multiple) closed doors and
zones with high humidity.
If "DECT" continues fl ashing, FRITZ!DECT
200 is not registered with the FRITZ!Box.
Register FRITZ!DECT 200 again.
13