Installation Method - Zycoo SC15 Guía De Instalación Rápida

Installation Method 1

1.Cut a hole in the ceiling with 210±5 mm diameter.
2. Connect network cable and power supply (if PoE is not enabled on the network cable), and other cabling if required.
3. Detach the metal mesh (adsorbed by magnets).
4.Adjust the clips and place the back end of the ceiling speaker into the mounting hole, adjust the clips again for being
able to clamp the ceiling.
5.Tighten the screws in order to tighten the clamping of the clips with the ceiling, and then cover the metal mesh.
Ceiling
Installation Method 2
1.To install the ceiling speaker with mounting brackets, please first fix the two plates to the plastic ring.
English
05
φ210mm
Metal Mesh