Maintenance Schedule; Transporting The Lawn Mower; Trouble Shooting - Yard force YF22-3N1SP-SC Manual Del Operador

STORING AND MAINTENANCE

MAINTENANCE SCHEDULE

Performing routine maintenance correctly on your lawn mower will ensure you get years of trouble-free use.
Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure the lawn mower
operates correctly and is safe to use.
12 hours of use
Air filter Clean
Spark plug Check
Engine oil Check

TRANSPORTING THE LAWN MOWER

Empty the gas tank. Always let the engine run until it has used up the remainder of gas in the tank.
Empty the engine oil from the warm engine. Remove the spark plug cover from the spark plug. Clean the
cooling fins of the cylinder and the housing. Use the original packaging to ship whenever possible.
24 hours of use 36 hours of use
Clean Clean
Clean Clean
Check and Add Check and Add
22
Hotline: 1-866-902-9690

TROUBLE SHOOTING

WARNING: Before performing any maintenance or cleaning work, switch off the engine and wait
until the blade has come to a stop.
Caution!
Improper repairs can result in the product functioning unsafely. This endangers yourself and your
environment.
Faults which cannot be rectified with the aid of following table may require service by an authorized Yard
Force or Briggs & Stratton repair center.
Please be aware that any improper repairs will also invalidate the warranty and additional costs may be
incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for this lawn mower. The
use of other spare parts not only voids the warranty, you can also endanger yourself and your environment.
Fault/malfunction Cause
Screws are loose.
Loud while running; machine Blade fasteners are loose. Blade
vibrates heavily. is unbalanced.
Start/stop lever not pressed.
Spark plug is defective.
Cutting blade is worn or damaged.
Engine does not start.
Fuel tank is empty.
Engine may be flooded.
Air filter is soiled.
Engine runs unsteadily.
Spark plug is soiled.
Blade is blunt.
Uneven mowing results. Cutting height is too low.
Blade is worn.
Grass bag is clogged.
Cutting height is not right.
Grass bag is not filled
The lawn/grass is wet. Discharge
sufficiently.
channel/housing is blocked.
Underside of the mower deck is
clogged.
Hotline: 1-866-902-9690
Remedy
Tighten screws.
Tighten blade fasteners.
Replace blade.
Press start/stop lever.
Replace spark plug.
Replace it through the customer
service centre.
Refill with fuel.
Remove plug and dry.
Clean the air filter.
Clean the spark plug.
Sharpen the blade.
Set correct height.
Replace the blade.
Empty the grass bag.
Correct the cutting height. Allow
the lawn to dry.
Clean the discharge channel/
housing.
Clean the underside of the mower
deck.
23