Intended Use; Technical Specifications; Assembly - Yard force YF22-3N1SP-SC Manual Del Operador

PARTS LIST
Fig. 2
A
B
C
D
WARNING!
If any parts are damaged or missing, do not operate this lawn mower until the missing parts
are replaced.
Failure to heed this warning could result in serious personal injury.
NOTE:
Always recycle the packaging in accordance with local recycling programs.
WARNING!
This item requires a two-person lift to remove from the packaging. Make sure that you have
position, bend at the knees and keep your back straight.

INTENDED USE

This gas-powered lawn mower has been designed for cutting residential lawn areas.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applica-
tions. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for
equivalent purposes.
I
H
G
F
E
8
Hotline: 1-866-902-9690

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
Engine type
Engine displacement
Engine speed
Cutting path
Grass bag capacity
Height adjustments
Front wheel diameter
Rear wheel diameter

ASSEMBLY

CAUTION! Read complete INSTRUCTION MANUAL before operating this machine.
IMPORTANT! THIS LAWN MOWER IS SHIPPED WITHOUT OIL OR GASOLINE IN THE ENGINE.
Your new lawn mower has been assembled at the factory with the exception of those parts left
disassembled for shipping purposes. All parts, such as nuts, washers, bolts, etc., necessary to complete the
assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all
parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure
proper tightness.
TO REMOVE LAWN MOWER FROM CARTON
1. Remove loose parts included with mower.
2. Cut down two end corners of carton and lay end panel down flat.
3. Remove all packing materials except padding between upper and lower handle and padding holding
control bars to upper handle.
4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts.
ASSEMBLING THE HANDLE
As shown in Figs. 3 and 4
Fig. 3
Hotline: 1-866-902-9690
Single cylinder 4-stroke
163 cc
3100±100 RPM
21" (53 cm)
16 Gallon (60 L)
1.25" - 3.75"(31-95 mm)
8" (20 cm)
12" (30 cm)
Handle knob and bolt
9