Sears Kenmore 127. 36700310 Manual De Uso página 4


If the power cord is damaged, the unit must be discarded to avoid a hazard.

This product must be disposed of properly according to local authority. By recycling, you
help save the environment.
ASSEMBLY INSTRUCTIONS
Install the two legs supplied to the bottom of the fan when using it on floor or table. Put your
fan upside down. Lock the two legs by snapping into the slot as seen below. DO NOT use the
legs for window installation.
OPERATION INSTRUCTIONS
PRE-OPERATING INSTRUCTIONS:

Carefully remove the fan from the box. Please save the carton for off-season storage.

Make sure the fan is in the OFF position before plugging it in
OPERATING INSTRUCTIONS:

The fan should be installed into a window. For windows that open up and down, the
minimum height is 12 inches and minimum width 22.5 inches. For windows that open left
and right, the minimum height is 22.5 inches and minimum width 12 inches.

To bring fresh air in, place the fan in the window with fan blade facing inside.

To exhaust stale air out, place the fan in the window with the fan blade facing outside.

For horizontal installation, place the base of the fan on the window sill, center the fan and
pull the expander panels to the side tracks. Close the window to the top of the fan.

For vertical installation, only one expander panel can be expanded. Place one side of the
fan with folded expander panel on the window sill, pull up the upper expander panel.
Close the window to the top of the fan.

Plug the power cord into any standard 120V AC,
60Hz outlet. Make sure the Selector (Speed) Control is
in the OFF position.

2 Speed Rotary Switches: Select the desired fan speed
setting by rotating the switch knob or turn the fan off.
USE & CARE ASSISTANCE
If you have safety, operation or maintenance questions concerning the use of this product, call
the following customer assistance number: 1-886-877-1889, or send an email to the following
address: Service@collinsinternational.com.
- 4 -
.