Publicidad
To mount the BOOM, you have to match frontally boom parts with the same letter (eg: AA, BB, CC etc), and a Once done, the plates
(EA010039) go with fixing screws DIN 933 M6X16 and washer DIN 9021 M6. It is recommended to put all the screws and washers before
fixing it for not to damage any threads of the BOOM.
BOOM
BOOM
The next step in assembling 2 BOOM and before making another step, which is to locate BOOM is the top and bottom. To do this model
have 2 holes where the 8 mm vertical reinforcements would put.
In the drawing you can see the position is that the lower elements BOOM go down, and the top toward the top.
The fastening and joining of these rods are made using screw DIN 933 M6X16 and washer DIN 9021 M6.
Consider the different lengths of the connecting rods of BOOM to respect the distances of the elements.
REFLECTOR
50DDO-R4S1
REFLECTOR
(EA010039)
(EA010039)
DIN 933 M6X16
DIN 9021 M6
DIN 933 M6X16
DIN 9021 M6
(EA010039)
A A
ENGLISH
DIRECTOR #2
50DDO-R4S2
DIRECTOR #2
Publicidad
