Wisecomm CW5700 Manual Del Usuario página 10

OPERATION WITH TV/MONITOR AND VCR
1. Connect the provided A/V (audio/video) cable to the A/V jack on the
receiver and to the jacks on your VCR's A/V jacks.
2. Be sure to connect the white connector of the A/V cable to the AUDIO IN
jack on the VCR, if the VCR has only a single jack for video input, connect the
yellow plug to it.
3. AUDIO IN jack and the yellow connector of the A/V cable to the VIDEO
IN jack on the VCR, if the VCR has only a single jack for video input, connect
the yellow plug to it.
4. Connect the other A/V cable (not supplied) to the VIDEO OUT and
AUDIO OUT jacks on your VCR. Connect the other ends to VIDEO IN and
AUDIO IN jacks on your TV/monitor.
Plug the provide AC adapter (DC 8V 250mA) into the DC jack on the
receiver and the other end into AC outlet.
Make sure the POWER switch is in the OFF position beforehand. Locate and
orient the receiver to get optimal performance.
5. Be sure the TV/monitor and the receiver are turned on.
6. Refer to the software in the disc included for USB function.
·Each VCR manufacturer uses different recording method. Refer to
VCR's instructions if it is impossible to setup the menu.