IKEA SKINA Manual Del Usuario página 5

wattage to prevent overheating; this
requirement does not apply to sealed
lighting chains.
4. Do not connect the chain to the
supply while it is in the packing.
5. For series-connected lamps where
fused lamps are used, do not replace a
fused lamp with a non-fused lamp.
6. Ensure all lampholders are fitted
with a lamp.
7. Ordinary lighting chains marked for
indoor use shall not be used outdoors.
8. Lighting chains which rely on
gaskets to provide protection against
ingress of dust and moisture must not
be used without all gaskets being in
place.
9. Make sure to follow the markings
regarding series and parallel
connection of lighting strings.
10. Only replace 'fused' lamps
(sometimes identified by a white mark
on the glass) with identical 'fused'
lamps.
11. For non-standard lamps (e.g. lamps
of push-in type) replacement lamps
must be of the same types as those
delivered originally or a type specified
by the manufacturer.
12. Do not attempt to replace non-
replaceable lamps.
English
This device complies with part 15 of the
FCC Rules. Operation is subjected to
the following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any
interference received, including
interference that may cause undesired
operation.
WARNING
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user's
authority to operate the equipment.
SAVE THESE
INSTRUCTIONS
5