Uline H-1307-MOUNT Manual De Instrucciones

H-1307-MOUNT
CONVEX MIRROR
FASTENER SET
TOOLS NEEDED
Drill
3" Drywall Anchor x 2
WOOD ANCHOR
1. Using a 1/8" drill bit, pre-drill a hole into wood.
(See Figure 1)
2. Drive wood anchor into pre-drilled hole until anchor
is fully seated. (See Figure 1)
CONCRETE ANCHOR
1. Using a hammer drill, drill a hole 1/4" deeper than
anchor embedment. (See Figure 2)
2. Drive concrete anchor into pre-drilled hole until
anchor is fully seated. (See Figure 2)
DRYWALL ANCHOR
1. Using a 1/2" drill bit, drill a hole through drywall
surface.
2. Assemble the drywall bolt and toggle on object.
(See Figure 3)
3. Insert bolt and toggle into pre-drilled hole in drywall.
(See Figure 3)
4. Tighten bolt against surface. (See Figure 3)
PAGE 1 OF 3
1-800-295-5510
uline.com
Phillips Head Screwdriver
2⁄" Wood Anchor x 2
INSTALLATION
Flat Head Screwdriver
PARTS
1¾" Concrete Anchor x 2
Figure 1
Figure 2
Figure 3
Para Español, vea página 2.
Pour le français, consulter la page 3.
Drywall
0521 IH-1307-MOUNT