Care And Cleaning; Cleaning Appliance - Gaggenau VG 231 CA Manual De Uso Y Cuidado

12
Place the pots on the pan
supports, never directly
onto the burners.
Prior to use, ensure that
the pan supports and lids
of the gas burners are
positioned correctly.
Handle vessels carefully on
the stovetop.
Don't bang the stovetop
and don't place any heavy
weights on it.

Care and cleaning

In this section, you'll find tips and information about
optimum care and cleaning of the stovetop.
,
WARNING: Risk of burns:
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
,
WARNING: Risk of electrical shock:
Don't use a high-pressure cleaner or steam
cleaner.

Cleaning appliance

Clean the appliance after each use, once it has
cooled down. Remove spilled fluids immediately; don't
let any food rests burn on.
The bright metallic color of the burner lid and burner
ring turns darker after long use due to natural
oxidation. The color change doesn't affect use.
Cleaning gas stovetops:
1
Lift up pan supports with both hands.
,
CAUTION:
The stovetop can become
scratched.
2
Remove burner lid, burner ring and burner head.
Only clean the burner parts when cold!
3
Let burned-on residue soak in a little water and
dishwashing liquid. This helps dissolve stubborn
grime. Don't use abrasive cleaning agents or
sponges.
4
Only use a little water to clean the stovetop. No
water must penetrate into the burner parts below.
5
Slight discolorations may occur on the stainless
steel surface due to heat generation. Don't try to
scrub away these discolorations, as it may
damage the surface. Distribute stainless steel
care product evenly thin along the stovetop (not
on the control panel!). This provides for an even
surface and your stovetop remains attractive-
looking for a long time.
6
Dry off the burner parts. Only turn on the
appliance once all parts are dry. Damp burner
parts could cause problems with ignition or an
unstable flame.
7
When assembling the burner ring and head, place
them on the burner such that the snap-in pins
engage into the appropriate slots. Make sure the
burner parts are correctly positioned; they must
lie straightly.