Window Requirements - GE AEH24 El Manual Del Propietario

1

WINDOW REQUIREMENTS

• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
30" to 41"
(With accordion panels)
26" min.
(Without accordion panels)
STORM WINDOW REQUIREMENTS
2
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than frame
Storm
window
frame
Installation Instructions
" min.
17 3 ⁄
8
Wood
Stool
REMOVE THE AIR CONDITIONER
3
FROM THE CASE
Remove the 2 shipping screws (if present)
A
from the back of the case and discard them.
Remove the locking screw and locking
B
bracket from the lower frame. Save to
reinstall later.
Remove the ground screw and save to
C
reinstall later.
Remove shipping screws (if present) and discard
Remove the ground screw
and save to reinstall later
Slide the air conditioner from the case by
D
gripping the base pan handle and pulling
forward while bracing the case.
PREPARE THE WINDOW
4
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
9