Window - GE AHE08 Manual Del Propietario Y Instrucciones De Instalación

Installation Instructions
1. WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
CAUTION
you have a window without a sill, you must order
accessory kit RAK87 to properly install this air
conditioner. Call 877.959.8688 or visit
GEApplianceparts.com.
• The air conditioner can be installed without
the accordion panels if needed to fit in a
narrow window. See the window opening
dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
(With accordion panels)
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
this, attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the sill to make it
than the top of the storm window
frame or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
than storm

window

frame
Storm window
frame
10
If the sill support bolts do not
contact the window sill, or if
than vinyl frame
(on some windows)
Sill
Vinyl frame
3. REMOVE THE AIR CONDITIONER
FROM THE CASE
A. Remove and save the 2 screws from the
lower sides of the front grille.
B. Grasp the lower corners of the grille while
pressing in on the case sides with your
finger tips. Pull out to release and lift it up.
NOTE: Do not pull the bottom edge toward
tabs of the grille.
C. When the front grille is removed the control
panel will still be attached by a harness.
D. Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not pull
or lift on the styrofoam discharge area.
Wood
FRONT
FRONT
Do not
pull or
lift in this
area—
damage
to the
unit may
result
FRONT
49-7794