Uline H-1018 Manual De Instrucciones página 2

1. Remove weights from both sides of dispenser by
sliding them up and pull out.
2. Install up to 15 of the Maxithins
# S-8113) in the left channel. Insert weight on top.
(See Figure 3)
Figure 3
PAGE 2 OF 6
LOADING INSTRUCTIONS
(Uline Model
®
S-8113
1-800-295-5510
uline.com
3. Install up to 22 of the Tampax
Model # S-8114) in the right channel. Insert weight
on top. (See Figure 4)
Figure 4
NOTE: For H-1018, insert key marked "CB" into
keyhole at bottom of door to remove coins.
Empty each time the dispenser is loaded to
ensure it does not jam.
4. Close dispenser door and lock both top and bottom
keyholes using a door key.
Tampons (Uline
®
S-8114
0421 IH-1018