Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING THE DEVICES
To mount the Alert Sensor:
•
Wall mounting using screws
1.
Attach the mounting bracket to the
wall using two screws (supplied).
You may need to use wall anchors
depending on the surface.
•
Wall mounting using adhesive tape
1.
Do not use on rough surfaces. Works best on flat, smooth
surfaces. Clean the surface with an alcohol/cleaning wipe,
and let dry.
2.
Attach the circular wall plate
bracket using two small screws (supplied).
3.
Affix the double-sided tape
wall plate
, then press the mounting bracket
A
firmly to the wall for 60 seconds to ensure solid
adhesion.
4.
Slide the Alert Sensor down onto the
mounting bracket until it is secured
in place. Then, adjust the angle of the
Alert Sensor accordingly to achieve
the best detection results.
Doorbell
The Doorbell can be mounted to the surface using the supplied mounting plate and
adhesive tape. Avoid mounting on metal surfaces as this can reduce the operating range.
1.
Make sure the surface is dry, smooth and free of dust and other substances that
could affect adhesion. Clean the surface with an alcohol/
cleaning wipe, and let dry.
2.
Peel off the adhesive tape liner on the back of the Doorbell
mounting plate, and then press the mounting plate firmly to the
surface for 60 seconds to ensure solid adhesion.
3.
Slide the Doorbell down onto the mounting plate until it clicks
into place.
2.
Slide the Alert Sensor down onto the
mounting bracket until it is secured
in place. Then, adjust the angle of the
Alert Sensor accordingly to achieve
the best detection results.
to the mounting
A
to the back of the
B
B
A
EN
9
Publicidad
Tabla de contenido
