Observe The Following - Aventics RAK Instrucciones De Servicio

AVENTICS | RAK | R402005099–BDL–001–AB 33
2.5

Observe the following

General information Observe the local regulations to avoid workplace accidents and
to protect the environment in the country of use.
The Drehantrieb must never be altered or modified from its
original configuration (not including mounting of accessories).
The Drehantrieb may only be used within the technical data
stated in the technical description. See the product catalog.
On installation Always depressurise the relevant part of the system before
installing or removing the Drehantrieb.
Make sure that installation of the Drehantrieb is complete
before connecting compressed air.
Secure the system against reconnection if installation is not
complete and you need to leave the installation unattended.
Position cables where people cannot trip over them.
On commissioning Check that all pneumatic connection ports are properly
connected or plugged.
Check carefully that the Drehantrieb and any connected parts
of the system are properly secured.
When starting, increase the pressure slowly and use speed
control.
In service In certain applications and installation arrangements there
may be a risk of crush injuries. Always follow the site safety
instructions.
Maintenance Never use solvents or strong detergents. Clean the
Drehantrieb only with a cloth slightly moistened with water or
a mild detergent.
Waste disposal Dispose of the Drehantrieb in accordance with local
regulations.