Dometic WAECO MagicTouch MT200 AU4 Indicaciones Para El Montaje Específicas página 17

_MT200_AU4.book Seite 17 Montag, 19. April 2010 7:26 19
MagicTouch MT200 AU4
Audi A8
Activation of the central locking and the indicators is performed at the central locking
pump.
➤ Connect the following cables of the radio remote control using piercing connec-
tors (fig. 3, page 2):
– Connect the grey cable to the red/brown original cable (rt/br) which is located
in the black plug
– Connect the blue/red cable to the brown/green original cable (br/ge) which is
located in the black plug
– Connect the black/green cable to the black/green original cable (sw/gn)
which is located in the black/purple coloured plug
– Connect the black/white cable to the black/white original cable (sw/ws) which
is located in the black/purple coloured plug
Audi Cabrio
The central locking activation is conducted by means of the central locking control
device. Activation of the vehicle's indicators is conducted in the cable strand in the
left side panel.
Audi Cabrio to construction year 96
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 4, page 3):
– Connect the grey cable to the brown/grey original cable which is located in
the brown plug
– Connect the blue/red cable to the brown/blue original cable which is located
in the brown plug
➤
Lay the black/green cable and the black/white cable of the radio remote control
to the left side panel.
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 9, page 4):
– Connect the black/green cable to the black/green original cable (sw/gn) in the
cable strand which leads to the rear lights
– Connect the black/white cable to the black/white original cable (sw/ws) in the
cable strand which leads to the rear lights
Installing and connecting the MT200
17