Remote Control Operation; Cda-7977/Cda-7876/Cda-7875 Only; Controls On Remote Control - Alpine CDA-7977 Manual De Operación

Remote Control Operation

Controls on Remote Control

CDA-7977/CDA-7876/CDA-7875 only

NOTE
Although the remote control is not supplied with the
CDA-7873, you can use it, if purchased separately.
1 Power Button
Press the button to turn the power on/off.
2 Source Button
Press to select the audio source.
3 -/J Button
Press the button to switch between the Play and
Pause modes for CD.
4 ANGLE 89 Buttons
Press the button to adjust the angle of the
movable display.
5 Band/Program Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ FM1 → FM2 → XM1 → XM2 → AM
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
→ 1 → 2 ... 6
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending order.
All manuals and user guides at all-guides.com
1
2
3
4
8 g DN Button
9 f UP Button
! 9 Button
" Mute Button
# Audio Processor Button∗∗
∗
∗∗
5
6
7
8
9
!
"
#
Radio mode: SEEK (DN) Button
CD mode: Press the button to go back to the
beginning of the current track.
Radio mode: SEEK (UP) Button
CD mode: Press the button to advance to the
beginning of the next track.
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
Press the button to call the external audio
processor mode.∗
For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
This button is used in conjunction with an optional Ai-
NET processor.
23
-EN