SEVERIN KP 1071 Instrucciones De Uso página 12

∙ Always ensure that air is able to circulate
freely underneath the unit. A minimum
distance of 10 cm to any wall must also
be observed.
∙ The ventilation slots on the unit must not
be covered during use.
∙ Do not operate the unit , unless suitable
cookware (with food in) has been put
on the cooking surface. When an empty
pot or pan is being heated, the overheat
protection will automatically turn the
appliance off. In this case, however,
damage to cookware or the unit itself
cannot be completely ruled out.
∙ Caution: With the heat emitted by the
cookware, the ceramic glass surfaces
may heat up. There is therefore a
danger of burns.
∙ Caution: Food containing fat or oil may
catch fi re when over-heated.
∙ Do not attempt to move the unit while
there is cookware on the ceramic surface.
∙ Do not pull or slide cookware over the
control panel, and do not place any
cookware on it.
∙ Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and also
- before cleaning the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ Do not let the power cord hang free.
∙ The power cord must be kept well away
from any hot part of the appliance.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
12
All manuals and user guides at all-guides.com
Start up
Before using the appliance for the fi rst time,
remove any remaining packaging and wipe
the surface with a damp cloth.
Suitable cookware
∙ This appliance must only be used with
∙ Cookware can be tested for its suitability
∙ Only fl at-bottom pots and pans may be
∙ Do not use any cookware with a base less
∙ Only pots and pans with a diameter of 12
∙ If unsuitable cookware is used, the
∙ Coated pots and pans may be damaged
∙ A maximum load of 6 kg for the cooking
Setting the power output / temperature
This appliance may be operated by
either of its control features, 'Power'
or 'Temperature' . For heating water,
steaming and similar cooking applications,
we recommend using the 'Power'
For frying, deep-frying and the like, the
'Temperature' control
cookware suitable for use with induction-
type hot-plates, eg stainless-steel with
a ferro-magnetic base, or cast-iron or
enamelled steel cookware.
by simply holding a magnet to the base;
if the magnet is attracted, the cookware is
suitable for use with this appliance.
used.
than 2 mm thick.
to around 22 cm may be used.
appliance will respond with an error
message (see 'Troubleshooting' table).
by excessive heat. It is therefore
important to select the appropriate
temperature level for the cookware in use,
and to follow the information provided by
the cookware's manufacturer.
plate must not be exceeded.
control.
should be used.