Liberty Hardware 94 Serie Instrucciones De Montaje

94X Series
Before you begin:
•Read the Do-It-Yourself Instructions completely before starting.
•Make sure all parts are included.
Parts List
• (2) Side-Mount Drawer Slides
• (12) #6 x 7/16 pan head wood screws
Data
• 50 lb. Capacity per pair
• Length of 14", 16", 18", 20", 22", 24"
1
Release Lever (push down)
Le levier déverrouillant (Appuyer)
Palanca abriendo (Presionar hacia abajo)
1. Press release lever (shown above) to disconnect drawer members.
3
Drawer member
Le membre du tiroir
Miembro del cajón
3. On drawer place and align drawer member into position. Place drawer
member end ush with the drawer overlay. Fasten each drawer member with
(3) #6 pan head wood screws.
Soft-Close Ball-Bearing Drawer Slides
Recommended Tools
• Screwdriver
• Pencil or Scribe
• Ruler
• Level
Drawer
Le tiroir
Cajón
Speci cations/Les spéci cations/Especi caciones
Drawer or pull-out shelf (Not drawn to scale)
-Le tiroir ou étagère s'enlevé (Le dessin n'est pas à l'échelle)
-Cajón o estante plegable (El dibujo no está a escala)
1/8"
1-1/4"
Side mount drawer slide
-La couilissant du tiroir côté-montée
-Correderas de cajón lado-montada
Speci cations
Drawer or Pull-Out-Shelf
• Drawer pull-out shelf must be 1/2" narrower than cabinet opening
on each side.
• Top and bottom of drawer or pull-out-shelf bottom should have 1/8"
minimum clearance from the cabinet opening.
2
Cabinet member
Le membre de l'armoire
Miembro armario
2. Using a level, place and align cabinet member into position and place side
ush with the cabinet edge. Fasten each slide with (3) #6 pan head wood screws.
You will need to move the slide member back and forth to access the screw
holes. For supporting heavy objects use (5) #8-32 machine screws and
inserts to avoid tear out of slide.
4
4. Insert drawer into cabinet and close. The drawer slide release lever will lock as
drawer is closed. Make sure drawer aligns properly and rides smoothly on the
side mount drawer slides.
Revised/Révisé/Corregido: 12.09.13
Cabinet
-L'armoire
-Armario
1-13/16"
1/2 "
Align to edge
Alignez pour affiler
Alinee para afilar
Slide member
Le membre couilissant
Miembro de la correderas
CP11878-XXX
©2013 Liberty Hardware Manufacturing Corporation