Chapter 1
Setting Up the dynadock™
and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1
Assemble the dynadock™
2
Connect the power adaptor
3
Install the software
4
Connect the dynadock™ to your computer
For more information on each step, refer to the appropriate section
below.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™
18