Tele System TS 8500 PND Guia De Inicio Rapido página 13

Operating modes
When Navigator is started the first time, you need to select whether to start the program in Simple mode or in Advanced
mode.
The two operating modes of Navigator mainly differ in the menu structure and the number of available features. The
controls and screen layouts are the same.
Simple mode: you have easy access to the most important navigation functions and the basic settings only. The
rest of the settings are set to values that are optimal for typical use.
Advanced mode: you have access to the full functionality of Navigator.
This Guide covers actions in Simple mode. See the User Manual for detailed instructions on both modes.
Later you can switch between the two operating modes:
To switch from Simple mode to Advanced mode: on the startup screen (Navigation Menu), tap
.
To switch from Advanced mode to Simple mode: on the startup screen (Navigation Menu), tap
.
Startup screen: the Navigation menu
After selecting Simple mode, the Navigation menu appears. From here you can reach all parts of Navigation Software.
The Navigation menu contains the following options:
Tap
Tap
Tap
All manuals and user guides at all-guides.com
to specify an address as your destination.
for the list of recent destinations.
to select one of the stored Points of Interest.
Quick Start Guide - ENGLISH
,
,
13