Getting Started - DragonTouch Vision 3 Manual Del Usuario

EN

GETTING STARTED

Welcome to your new Vision 3. To capture videos and photos, you need a memory
card (not included).
MEMORY CARDS
Use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Before using this camera, please format the memory card first. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting
deletes all of your data, so be sure to transfer your photos and videos first.
2. The FAT32 format memory card will stop recording when the storage of each file
exceeds 4GB and start to record again in a new file.
POWERING ON AND OFF
To Power On:
Long press the Mode button for three seconds. The camera will beep and the status
light will be on. When information appears on the LCD display or the camera status
screen, your camera is on.
To Power Off:
Long press the Mode button for three seconds. The camera will beep and the status
light will be off.
SWITCHING MODES
To Switch Modes:
Turn on the camera and press the Mode button to switch modes.
To Exit a Mode:
Press the Mode button to exit a mode.
4