Biamp Vocia LSI-16 Manual De Operación página 3

LSI-16 Setup and Installation
Setup and Use
The LSI-16 and LSI-16e govern the emergency functions of a Vocia system, monitoring and reporting
faults and alarm conditions through indicators and the system software. Incorrect configuration, removal,
or non-installation of some system elements may result in the LSI-16(e) reporting a fault or alarm
condition. This is normal operation. For correct, fault-free operation, inputs and outputs must be
connected to the LSI-16(e) as detailed in this manual. The Vocia software provides the intuitive interface
for configuration, DSP equalization, and programming of the LSI-16 and LSI-16e. For details on software
setup, please consult the Vocia Help File.
Installation
Install the unit away from heat sources, such as vents and radiators, and in rooms with adequate
ventilation. Ensure that air can circulate freely behind, beside, and above the unit. Do not exceed the
maximum ambient operating temperature of 18°-108° F (-8° - 42°C). Be aware of conditions in an
enclosed rack that may cause the temperature to exceed ambient room conditions.
The unit requires one 1.75 inch (44.45 mm) high and 19 inch wide rack space with 10 inch (254 mm)
depth. Mounting the unit using four screws with washers will prevent marring of the front panel. PVC or
nylon washers are appropriate.