Biamp Vocia LSI-16 Manual De Operación página 7

Using PoE Power
The LSI-16 and LSI-16e have dual, monitored PoE capable Ethernet ports enabled by default. For fault tolerant or compliant
Additional (Auxiliary) power is also provided via a dedicated 24V connection
LSI-16 Ethernet connection using a PoE switch:
LSI-16e Ethernet connection using a PoE injector:
Monitored I/O
Two black five-position connectors are located next to the rotary switches. These are predominantly used
for monitored inputs and outputs (I/O) to external lamps or sounders. Individual connections are labeled 1
through 8. One connection is configured for use as both an input and an output (1) and one as an input
(2) (see table below for connector assignments).
Marking Function
Ground
1 Sounder Output / Silence Input
2 System Fault Reset Input
3 Voice Alarm active
4 General Fault
5 PSU Fault
6 Protection Fault
7 Path Fault
8 External Supply Over-voltage Monitor
10V 10V Out
NOTE
systems both interfaces must be used.